Cloud in a Bottle – Experiment you can do at HOME..!

Cloud in a bottle

Making a cloud inside a bottle may help you figure out how they form outside in the sky.

Warm, moist air rises in the atmosphere, cools, and beautiful, puffy clouds can be the result. Tiny water droplets become clouds of many different kinds at many different altitudes depending on the conditions. Making your own cloud in a bottle is a popular activity in many science books but it can be a little tricky to pull off. Sometimes the results can be hard to see but practice makes perfect. It also helps to use some ingredients other than water, too.

Here’s what you need: Foot Pump , Rubber Stopper , Rubbing Alcohol , Clear 1 liter bottle , Adult supervision.

Steps:

1. Let’s start with making the easy cloud first and then you’ll know what to do for the tougher version. Wear safety glasses and pour a little alcohol into the bottle so it puddles in the bottom.

2. Swirl the alcohol around inside the bottle. Make sure it coats the lower sides of the bottle.

3. NOTE: The metal inflation tube needs to go through the stopper. From the bottom of the stopper, drill a hole through the center of the stopper that’s a little smaller than the inflation tube. The tube should slide easily through the stopper from the top to the bottom but still be tight enough to seal the air inside the bottle. The tip of the tube goes inside the bottle and the pump connection goes outside. Attach the pump to the inflation tube.

4. Insert the stopper into the bottle and pump eight to ten times. As you start to pump, you’ll notice that the stopper wants to pop out. Hold it tightly in the bottle opening so it doesn’t. It may be stronger than you think!

5. When you’re ready, quickly remove the stopper and watch the cloud form almost instantly in the bottle. If the cloud is faint or just a small puff of one, you’ll need to add more pressure in the bottle before you pop the stopper.

How it Works

Even though you can’t see them (even when it’s raining), water molecules are in the air all around you. These invisible, airborne water molecules are called water vapor. When water vapor is bouncing around in the atmosphere, it has a lot of motion energy and doesn’t normally stick together.

Pumping air into the bottle forces water vapor to squeeze together or to compress. Releasing the pressure quickly allows the air in the bottle to expand quickly. In doing so, the temperature of the air in the bottle becomes slightly cooler. This cooling allows the water vapor to stick together – or condense – more easily, and form tiny droplets. Clouds are nothing more than gazillions of groups of tiny water droplets! By the way, rubbing alcohol forms a more visible cloud because alcohol evaporates faster than water. Alcohol molecules have weaker bonds between them than water molecules so they let go of each other easily. As a result, there are more evaporated alcohol molecules in the bottle that are able to condense at a lower pressure. That’s why you see the alcohol cloud more clearly than the water vapor cloud earlier on in the pumping process.

Clouds on Earth form when warm air rises and its pressure is reduced. The air expands and cools, and clouds form as the temperature drops below the dew point. Invisible particles in the air in the form of pollution, smoke, dust, or even tiny particles of dirt, become a nucleus on which the water molecules can attach themselves and go from invisible to visible as a cloud.

Credits: Steve Spangler

If this was Informative.. Share it with your friends and family…

Sharing is Caring..!  ^_^

If u liked this…Leave a Like… ^_^ 

G+       Facebook      Youtube

                              Thänk Yoυ ✌

Advertisements

1 Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s